
Aluminium kits
Clip-held panes are eased out, then the slender frame unbolts into lengths that travel easily.
Home / Services / Greenhouse removal
Greenhouse removal
A greenhouse comes apart as glass, a frame and a base, and each part has to travel separately. We lift the panes, dismantle the frame and carry everything out, so you are not left with a heap of shards on the soil.

Request a quote
Tell us the size, whether the glazing is glass or plastic, and how far it is from the road.
Most domestic greenhouses in Birmingham gardens are aluminium kits with overlapping horticultural glass, though timber-framed and polycarbonate models turn up as well. The risky part is always the glazing, not the frame.
Panes come out first and are wrapped so they can pass a side gate or a shared entry without chipping. The frame is then unbolted, the base loosened, and the lot carried to the van. Nothing is left in a pile for you to finish. A shared entry or a long garden path means every pane and bar travels by hand, so a full-width frame is sometimes unbolted further to pass the tightest gate. Glass and aluminium leave in our van, with no hired skip left on the drive.

The method stays the same; the fittings and the weight change.

Clip-held panes are eased out, then the slender frame unbolts into lengths that travel easily.

Heavier bars and often painted glazing beads; more time is spent easing glass from swollen wood.

Sheets are lighter and less brittle than glass, but still need to be unscrewed and stacked, not folded.
A short, careful sequence so glass never crosses the garden loose.
Staging, pots and heaters come out first and can leave with the structure.
Each pane or sheet is taken out, wrapped and set aside.
Sills, bars and ridge pieces come apart in the reverse of the original kit.
The cill or dwarf-wall cap is loosened and fragments are swept from the soil.
Horticultural glass is thinner than ordinary window glass and chips from a corner knock. We carry it on edge, wrapped, and we never stack bare sheets in a barrow. Already-broken panes are taped in a grid first so they travel as one piece rather than as a shower of splinters.
Polycarbonate is kinder to handle but still comes off in sheets. Screws at the laps often seize; we cut them rather than twist the panel until it splits. Either way, the garden is swept for fragments before we go, including the soil along the cill.

Many houses sit on a low brick dwarf wall or a simple aluminium cill on slabs. We can lift the cill and, if you ask, take up the slabs. A masonry dwarf wall is closer to demolition work; say whether you want it left as a planter edge or taken down.
If a shed stands next to the greenhouse and both should go, we can handle them on the same visit, from shed removal through to a larger summer house.

Ready to have the greenhouse taken away?
A photo of the glazing and the path to the road is enough to start a quote.
A view of the building and the approximate size are usually enough for us to reply.